Create this project yourself with sheet material cut to size by TOSIZE.dk!

Panagiotis

Very easy

2 minutes

In this DIY project, Panagiotis shows how he finished his shed with custom-sawn OSB panels. He ordered this online so that he could start his job immediately. Read more about his experience and approach below.

Description of Panagiotis

The shed was never finished on the inside, which caused a lot of spiders and dust to get into the frame. Because I would like to store the cushions from the lounge set here, I finished the shed with OSB3 panels that were cut to size at this company. Panels were perfectly sized (unfortunately the shed was a bit crooked) and delivered quickly. The entire job took about 2 hours.

How I made this project

Supplies:
- Dustpan & tin
- Drill
- T15 screws 25mm long
- Two hours at the weekend

First I dusted the shed and cleared it of all spiders. I then attached the OSB3 plates to the existing wooden framework with screws. For each large plate (90-100cm by +-218cm,) I used around 20 screws, for the smaller plates (40-60cm by +-218cm) I used around 12 screws per plate, so they are well secured. Because the OSB3 panels had already been cut to size, this was a simple job that could be carried out by 1 person. Now let's hope the spiders stay away!