- TOSIZE.dk
- Do it yourself
- DIY Projects
DIY: box for a homemade Bakfiets / cargo bike, by Zoltan
![TOSIZE Furniture](https://static.tosize.com/General/ads/furniture/image-thumb__31305__en_dk_default_800x450/tosize-furniture-banner.webp)
![Logo TOSIZE.dk](https://static.tosize.com/TOSIZE.dk/en_DK/logo/frontend/logo-white.png)
Create this project yourself with sheet material cut to size by TOSIZE.dk!
![Zoltan](https://static.tosize.com/General/Karakters/hans_potloot_oor.png)
Zoltan
![NL](https://static.tosize.com/General/countries/jpg/nl.jpg)
Average
1 minuut
Description
My homemade cargo bike had to have a nice box. Strong 9.0 mm plywood with waterproof vandal-proof layer, i.e. concrete plywood! And the bottom plate is also non-slip, which makes it safe.
DIY: creating a box for a cargo bike
The bottom plate was the basis, a few corners were still cut out until it lays nicely. Then mount the backrest at an angle of 10 degrees. The same way I made the front panel on the front beam of the bicycle frame.
Then the sides, the only thing I really had to do myself was saw off the sloping edge at the front. It showed up nicely after test installation.
Then drill a lot of holes and install them with seat corners and m6 carriage bolts and adjusting bolts.
The open edges of the must be finished. I used rambo armor paint, 3 layers, colorless.
Container accurately to size
The container is 60.0 cm wide, the bottom is 80.0 cm long and the top is approximately one meter . Container height 50.0 cm
Tip! Also check out our handy DIY tips!
How next?
Want to make this DIY project? Check out Zoltan's saw list and complete your order easily.
DKK 1,603.21
View all sheet materials