- TOSIZE.dk
- Do it yourself
- DIY Projects
Sturdy washing machine structure made of custom-sawn plywood, by Roderick
![TOSIZE Furniture](https://static.tosize.com/General/ads/furniture/image-thumb__31305__en_dk_default_800x450/tosize-furniture-banner.webp)
![Logo TOSIZE.dk](https://static.tosize.com/TOSIZE.dk/en_DK/logo/frontend/logo-white.png)
Create this project yourself with sheet material cut to size by TOSIZE.dk!
![Roderick](https://static.tosize.com/General/Karakters/hans_potloot_oor.png)
Roderick
![NL](https://static.tosize.com/General/countries/jpg/nl.jpg)
Easy
1 minuut
In this DIY project, Roderick shows how he used the online sawing service to create a sturdy structure for the washing machine. He chose to order waterproof plywood in a thickness of 18mm. By ordering the panels online, he could get started on the job immediately.
Description of Roderick
Walk-in closet in the laundry room around the central heating boiler. However, the drainage flowed in an unfavorable manner, which made it more beneficial to build the cabinets on a surface so that the washing machine could be placed against the back. Built a sturdy elevation using plywood for this purpose
How I made this project
Have plywood cut to the correct sizes by ordering them online, then use a jigsaw to cut recesses at the back for the drain made. The uprights were made where the cabinets were located. Screws driven through the plywood, so that it is a sturdy whole. Made level by making small slats from the sawn off material. (this was necessary because the floor is not 100% even). Finally got it perfectly level. The Ikea/PAX cabinets were reinforced in the cabinet with washing machine (due to weight 80kg).
Dimensions of my DIY project
200.0 cm x 66.0 cm
Tip! Also check out our handy DIY tips!
How next?
Want to make this DIY project? Check out Roderick's saw list and complete your order easily.
DKK 1,417.35
All materials used
View all sheet materials