MDF Water-resistant Oak mix cross veneer

MDF Water-resistant Oak mix cross veneer custom-made boards order online

Order cut-to-size MDF Water-resistant Oak mix cross veneer easily online. You can have veneered MDF cut to size up to the millimetre. We deliver the panel fully customised to your home. Are you curious about the possibilities? Configure your product, and you will have your project ready in no time.

MDF Water-resistant Oak mix cross veneer : what is it?

MDF moisture-resistant is a widely applicable board suitable for a variety of interior panelling applications where the space is humid, such as in bathrooms and kitchens. The V313 characteristic comes from the test for moisture resistance that the board material undergoes, called V313. It indicates that the board is not only moisture-resistant, but also water- and mould-resistant. Note that the board is not waterproof! Moisture-resistant MDF boards are composed of dried wood fibres and glue. These wood fibres are then compressed under high pressure and temperatures to form an MDF board. In MDF moisture-resistant, a special, moisture-resistant type of glue is used. To enhance the moisture-resistant properties, the material is pressed under a higher pressure compared to MDF blank. The extra-hard pressing makes this type of wood easy to work with. Moisture-resistant MDF boards can be recognised by their green core. MDF Water-resistant Oak Dose Veneered is not suitable for outdoor use.

MDF Water-resistant Oak mix cross veneer, sheet material with a natural topcoat

Unlike melamine faced board material, the top layer of veneered panels is a layer of real wood. This gives the material a peaceful, natural look. Because it is a natural product, there may be differences in colour and structure between different panels. No two panels are the same. In addition, it is important that this panel is finished with a varnish or oil as desired. This prevents discolouration and preserves the top layer. 

The great advantage of veneered board material compared to solid board material is that it does not warp. The MDF core of this board material gives it the advantages of MDF, but the appearance of solid and natural wood.

Cross veneer

As standard, the grain runs lengthwise. In this panel, however, the veneer is applied transversely. The grain runs horizontally. Keep this in mind when ordering. So you can be sure that you have ordered the right one!

Crown cut or Quartered veneer

Cutting logs is usually done in two different ways: crown / plain or kwartiers. When the wood is cut crown / plain, long slices are cut lengthwise. This allows the flames of the material to be clearly seen and makes the best use of the wood. When the wood is quartered} cut, it is cut with the grain. This gives kwartiers sawn timber a calm appearance and relatively straight lines. In mix, these two techniques are processed interchangeably and used during the compilation of the veneer. This creates a natural whole and makes each slab unique.

Available thicknesses MDF Water-resistant Oak mix cross veneer

You can order customised, high-quality, veneered MDF from us in various thicknesses. You can easily specify the desired thickness in the product configurator. This way, you can be sure that the panel material meets your requirements: both the format and the thickness of the material. The following thicknesses are available: 19 mm.

Editing of MDF Water-resistant Oak mix cross veneer boards

The board consists of wood fibres that are compressed under high pressure. This makes the material easy to process. When milling or sawing, this board material does not splinter. The fibres are held together by resin. Therefore, it is important to degrease the board properly before varnishing it. Veneered MDF is only suitable for indoor applications and in dry conditions.

Specific applications of MDF Water-resistant Oak mix cross veneer

MDF is the material of choice for furniture and interior applications. This can be a cupboard, a wall or an entire casing. With this moisture-resistant variant, the furniture is also suitable for the bathroom, garage or kitchen. Examples of projects are a partition wall in the bathroom or a window sill. Thanks to the decorative top layer of real wood, MDF Water-resistant Oak mix cross veneer is ideal for making bathroom furniture, kitchen cabinets and other furniture that is regularly exposed to high humidity.

Alternatives to MDF Water-resistant Oak mix cross veneer boards

Is MDF Water-resistant Oak mix cross veneer not the right type of wood for your job? Looking for board material with a grain? Then go for poplar plywood. Looking for board material that can be used outdoors? Then take a look at phenolic plywood, MDF tricoya or multiplex okoume. Or view our other MDF board materials here: